RIVA S FIRMWARE UPDATE INSTRUCTIONS
To install the update on your RIVA S, you will need a Windows PC, your RIVA S speaker and USB to micro USB cable.
Please find“ CSRBlueSuite 2.5.8”from“all programs” on your computer and select 'DFUWizard” and click. NOTE: For below step, if your computer is default as first one and cann’t switch to second option. Pls don't worry, the first one is also OK, but the process will slower than the second option. Sep 13, 2019 Both methods require BlueTest3 utility which is included in CSR’s BlueSuite2.5 software. Method 1 requires RN41/RN42HCI module and access to module’s UART interface. Method 2 requires a CSR USB SPI programmer and access to the RN41/RN42 SPI interface. HCI modules is not needed for method 2. CSR BlueSuite is a Shareware software in the category Audio & Multimedia developed by Cambridge Silicon Radio Ltd. It was checked for updates 31 times by the users of our client application UpdateStar during the last month. The latest version of CSR BlueSuite is currently unknown. It was initially added to our database on. Aug 06, 2015 This configures the default behaviour of the BlueSuite programs. Please refer to section 2.3 for USB SPI (USB-to-SPI converter is needed) and section 2.2 for LPT SPI (LPT-to-SPI converter is needed). For LPT-to-SPI: the LPT-to-SPI driver only supports WinXP (it does not support Win7).
Csr Bluesuite 2.5 8 Download
Please follow these steps to update your RIVA S:
1. Download and run the installer located at http://bit.ly/RIVA_S_Installer.
2. Once the installer is running, follow the steps as prompted.
a. Leave all boxes checked during the installation process.
3. Now that the RIVA S Installer has been installed on your Windows PC, download the RIVA S Firmware located at http://bit.ly/sfirmware.
4. Navigate to your START button and find the CSR BlueSuite 2.5.0 folder. In this folder locate and launch the DFUWizard (it should have a blue and white icon).
5. Please follow these steps to update the firmware on your RIVA S:
a. Power on your RIVA S.
i. We recommend you connect it to the DC adapter/charger in case the
battery has a weak charge.
ii. Make sure it is not paired to any of your Bluetooth® devices. Press and hold the Input button (with the Bluetooth® icon) to unpair.
b. Press and hold the + & – buttons together until the battery indicator changes to alternating blue/violet color, approximately 10 seconds.
c. Using the micro USB cable, connect your RIVA S to your Windows PC in a USB
2.0 port.
i. The battery light indicator, located on the back of your RIVA S will change to a pulsing cyan/aqua color.
ii. You should also hear a beep or see an indication on your computer that it is connected to a USB device.
iii. After your PC has detected the speaker, as indicated above, click NEXT.
d. Make sure that Universal Serial Bus (USB) is selected and click NEXT.
* If your computer states that no speaker is found, leave the cable plugged into your computer and speaker, power the RIVA S speaker Off/On, unplug the cable from the RIVA S and continue from step “b” above.
** If that doesn’t resolve it, navigate to where you installed the Firmware Installer. This is likely going to be something like C:Program FilesCSRBlueSuite 2.6.2. Enter the folder called Drivers, then open Win64. Within this folder you should see something called DPInst.exe. Run this program and then start the firmware update process from the beginning of this document.
e. Select the top Option “Download a new version of the firmware, saving a copy of the current version first.” Click NEXT.
f. Click BROWSE and locate where you have downloaded the RIVA S Firmware file. Click on the file and click SELECT. Click NEXT.
g. Click NEXT again. Your firmware update will begin at this point.
h. When the update completes, click FINISH. DO NOT TURN OFF YOUR RIVA S SPEAKER AT THIS POINT.
i. The battery light indicator will show a rapidly flashing green light. After a few minutes, the battery light indicator will return to a slow pulse. Color will vary based on level of battery charge on your RIVA S.
i. Unplug the micro USB cable from your RIVA S and turn your speaker ON.
j. Please perform a factory reset at this point:
i. Reset the speaker by simultaneously pressing the +, BT, and Power buttons for approximately 10 seconds. You will hear a quick double beep sound. The speaker will turn OFF and back ON automatically.Your RIVA S Firmware update is now complete.
1. Download and run the installer located at http://bit.ly/RIVA_S_Installer.
2. Once the installer is running, follow the steps as prompted.
a. Leave all boxes checked during the installation process.
3. Now that the RIVA S Installer has been installed on your Windows PC, download the RIVA S Firmware located at http://bit.ly/sfirmware.
4. Navigate to your START button and find the CSR BlueSuite 2.5.0 folder. In this folder locate and launch the DFUWizard (it should have a blue and white icon).
5. Please follow these steps to update the firmware on your RIVA S:
a. Power on your RIVA S.
i. We recommend you connect it to the DC adapter/charger in case the
battery has a weak charge.
ii. Make sure it is not paired to any of your Bluetooth® devices. Press and hold the Input button (with the Bluetooth® icon) to unpair.
b. Press and hold the + & – buttons together until the battery indicator changes to alternating blue/violet color, approximately 10 seconds.
c. Using the micro USB cable, connect your RIVA S to your Windows PC in a USB
2.0 port.
i. The battery light indicator, located on the back of your RIVA S will change to a pulsing cyan/aqua color.
ii. You should also hear a beep or see an indication on your computer that it is connected to a USB device.
iii. After your PC has detected the speaker, as indicated above, click NEXT.
d. Make sure that Universal Serial Bus (USB) is selected and click NEXT.
* If your computer states that no speaker is found, leave the cable plugged into your computer and speaker, power the RIVA S speaker Off/On, unplug the cable from the RIVA S and continue from step “b” above.
** If that doesn’t resolve it, navigate to where you installed the Firmware Installer. This is likely going to be something like C:Program FilesCSRBlueSuite 2.6.2. Enter the folder called Drivers, then open Win64. Within this folder you should see something called DPInst.exe. Run this program and then start the firmware update process from the beginning of this document.
e. Select the top Option “Download a new version of the firmware, saving a copy of the current version first.” Click NEXT.
f. Click BROWSE and locate where you have downloaded the RIVA S Firmware file. Click on the file and click SELECT. Click NEXT.
g. Click NEXT again. Your firmware update will begin at this point.
h. When the update completes, click FINISH. DO NOT TURN OFF YOUR RIVA S SPEAKER AT THIS POINT.
i. The battery light indicator will show a rapidly flashing green light. After a few minutes, the battery light indicator will return to a slow pulse. Color will vary based on level of battery charge on your RIVA S.
i. Unplug the micro USB cable from your RIVA S and turn your speaker ON.
j. Please perform a factory reset at this point:
i. Reset the speaker by simultaneously pressing the +, BT, and Power buttons for approximately 10 seconds. You will hear a quick double beep sound. The speaker will turn OFF and back ON automatically.Your RIVA S Firmware update is now complete.
If you have any questions, please contact RIVA Audio Customer Support.
Aug 31, 2020 The Prometheus class is one of the most versatile ships ever designed by Starfleet. Intended for combat, the original prototype USS Prometheus employed a multi-vector assault mode; the ship divides into three semi-autonomous sections capable of fighting independently from each other.Each section is also capable of achieving warp speed. According to the Star Trek Online ship. Star trek prometheus class.
Cambridge Silicon Radio Ltd. – Shareware – AndroidWindowsMac
Overview
Csr Bluesuite Download
CSR BlueSuite is a Shareware software in the category Audio & Multimedia developed by Cambridge Silicon Radio Ltd. Boardmaker studio for mac.
It was checked for updates 31 times by the users of our client application UpdateStar during the last month.
The latest version of CSR BlueSuite is currently unknown. It was initially added to our database on 07/06/2010.
Csr Bluesuite 2.5.8
CSR BlueSuite runs on the following operating systems: Android/Windows/Mac.
CSR BlueSuite has not been rated by our users yet.
Write a review for CSR BlueSuite!
31 users of UpdateStar had CSR BlueSuite installed last month.
09/09/2020 | EmEditor 20.1.1 |
09/09/2020 | マカフィー リブセーフ 16.0.R.27 |
09/09/2020 | Supporto applicazioni Apple bit) 8.6 |
09/09/2020 | WinZip Driver Updater 5.34.1.6 |
09/09/2020 | cyberJack Base Components 7.8.6 |
09/01/2020 | Firefox 80.0.1 update with bug fixes available |
08/26/2020 | New Kaspersky 2021 adds new functionality |
08/25/2020 | Firefox 80 and Tor Browser 9.5.4 updates available |
08/18/2020 | Chrome Chrome security update available |
08/12/2020 | Security updates available for Chrome and Edge |
![Csr Csr](https://www.tinyosshop.com/image/data/News/AudioB/AudioB%20programming-8.jpg)
![Bluesuite Bluesuite](https://avantree.com/fr/pub/media/FAQimagesOasisPlus/FAQimagesDG50/4-1.png)
Csr Bluesuite 2.5 3
- » csr bluesuite tools download
- » bluesuite download csr bluetooth
- » csr harmony 최신버전
- » bluesuite 3.1.4
- » csr 2.6.2
- » csr intallbluesuite
- » blue test3 csr
- » bluetest3 ble test
- » csr bluesuite 2.4 download
- » bluesuite 2.5.8 usb driver not detecting